From Drums of Powdered Chemicals, to Tote Bins
of Plastic Pellets, a Skip Hoist Cable Dumper is the solution for discharging
the contents of any container into your Process System. We have manufactured
Skip Hoist Cable Dumpers for all industries from Automobile Parts Manufacturing
to Waste Disposal.
Bulk items such as Aggregates, Soils, Fly Ash, Metal Scrap, etc. can be handled
using a skip designed for accepting loose materials and loaded with conveyors,
feeders or bucket loaders. Industries such as Steel, Mining, and Recycling are
typical for these applications.
We only use brands such as Allen Bradley, SEW-Eurodrive, and SKF to name a few.
Another Skip Hoist Cable Dumper was used for transferring 2,400 pounds of
chewing gum base components into a mixer. It handled a specially designed cart
that was compatible with other equipment in the plant and was lifted with forks
to avoid an overhead hold down which would have restricted material discharge.
The Skip Hoist travels 14'-3" at a speed of (40) feet per minute and operates
(24) hours per day, (6) days per week. Roller chain was used in lieu of cable to
provide a powered down feature that the customer desired and also allowed for an
increased dumping angle.
When you need to discharge the contents of a container, the Hydraulic Dumper is
the answer. Designed and manufactured to match your specific requirements, an
Essex-Rise Dumper will perform as intended upon delivery.
Hydraulic Dumpers are used in Industries such as Automobile Parts, Building
Products, Chemicals, Food and Beverage, Home Products, Waste Reclamation, etc.
Typical examples are; dumping tote bins of small parts into finishing equipment,
dumping steel totes of chopped fiberglass for manufacturing roofing shingles,
dumping cardboard gaylords of polyurethane pellets into an extruder, dumping
bales of plastic bottles onto a conveyor for sorting and separating, etc.
Essexrise Corporation and IEDCO (Industrial Equipment & Design Company) have
established a relationship permitting us to join forces in the marketing, sales,
engineering and production of the Column Lift based product line. These products
are specifically directed towards the pharmaceutical and food products
industries that require a clean and hygienic method of materials handling for
Bulk Bags, Drums, IBC's and other bulk containers. We have also used this
technology to provide hygienic Material Lifts for Lifting loads between floors
and mezzanines. Controls are PLC based using an HMI operator panel and can be
connected to facility networks for data acquisition and process validation.
The 4-Post Material Lift is powered Up/Down
via momentary contact pushbutton with E-stop at each level and is equipped with
upper/lower travel, upper over travel and slack cable limit switches. Motor
starting is via a full voltage reversing magnetic contractor with solid-state
overload, phase loss and jam protection. Car guides and rails are machined
Elevator Tee rails with either sliding or roller guides for smooth car travel.
Cable sheaves are machined steel with permanently sealed and lubricated ball
bearings. The (2) lifting cables have a 5:1 safety factor minimum and include a
free-fall safety to prevent the platform from an uncontrolled decent should the
cables break.
|
Essex
Rise Corporation was founded in 1946 as a Materials Handling Equipment 
One
of the products represented at the time was "Cesco" 